I have finally gotten around to drilling the holes and cutting the reliefs on the plastic router mounts that I made a few weeks ago. The two plastic mounts are now on the machine and holding the router. I was able to find some 1/4" wing nuts in the bin of miscellaneous nuts and bolts, which work really well. Being away for school means I hardly get to come home and work on the CNC. Although I am already planning my next CNC build which I hope to work on over Thanksgiving break.
Showing posts with label update. Show all posts
Showing posts with label update. Show all posts
October 11, 2009
September 8, 2009
Z Axis Update Deisgn

The Z axis slash Y axis setup is falling apart due to using screws in the MDF wood (or i should say sawdust glued together). Instead of going and buying cross dowels, Im going to just use 1/4" nuts, bolts and washers instead. Notice on the attached picture, I plan to cut out square pockets where the nuts and bolts will hold the joints together. This should be pretty easy to make, and Im planning on using the CNC to cut out the pockets instead of using a 3/4" drill bit so that the nut can be up against a flush surface.
Subscribe to:
Posts (Atom)
