Showing posts with label z axis. Show all posts
Showing posts with label z axis. Show all posts

September 10, 2009

Z Update Completed


   So now the Z axis is almost 100%. And I do have to say, I love the look of the copper rails. The build went together almost flawlessly. Amazing what spending some time in a CAD program can do to save headaches instead of realizing halfway through building that something isn't going to fit. As you can see from the slideshow, I used the CNC to cut out the pockets for the bolted connections. This design is far stronger than using screws in MDF wood. You can torque down the bolts to adjust the Y axis bearing slides. I used 1/4" by 1.5" long bolts and nylon nuts so they don't back out. Im really happy with taking the time to rebuild the Z axis; it was a mess earlier due to the heavy router. Im sort of burnt out right now with the CNC machine. Ive been spending the past two weeks working on it non stop it seems. At least its up and running well. Just have to start cutting some stuff out.

September 8, 2009

Z Axis Update Deisgn


The Z axis slash Y axis setup is falling apart due to using screws in the MDF wood (or i should say sawdust glued together). Instead of going and buying cross dowels, Im going to just use 1/4" nuts, bolts and washers instead. Notice on the attached picture, I plan to cut out square pockets where the nuts and bolts will hold the joints together. This should be pretty easy to make, and Im planning on using the CNC to cut out the pockets instead of using a 3/4" drill bit so that the nut can be up against a flush surface.

Search This Blog